FluxMPS™ Dulbecco’s Modified Eagle Medium/ Ham's F-12 Nutrient Mixture (DMEM/F-12) (1:1) with 15mM HEPES w/o L-Glutamine, Sodium Bicarbonate: 1X Liquid

Product#: DCP-DM12H-QBT1X
$49.50
DCP-DM12H-QBT1X
Availability:
Ships in 1-2 Weeks

warning For Research Use Only (RUO). Not intended for clinical, diagnostic, or therapeutic use in humans.
ISO 13485 Certified Manufacturing

FluxMPS™ Dulbecco’s Modified Eagle Medium/ Ham's F-12 Nutrient Mixture (DMEM/F-12) (1:1) with 15mM HEPES w/o L-Glutamine, Sodium Bicarbonate: 1X Liquid

Contains Phenol Red Contains HEPES Contains Calcium Contains Magnesium Contains Glucose Contains Sodium Pyruvate Without L-Glutamine Without Sodium Bicarbonate

FluxMPS™ Dulbecco’s Modified Eagle Medium/ Ham's F-12 Nutrient Mixture (DMEM/F-12) (1:1) with 15mM HEPES w/o L-Glutamine, Sodium Bicarbonate: 1X Liquid is a Microfluidics Suitable, quadruple-stage ultra-filtered (0.1 µm ×2 + 0.04 µm ×2) 1X liquid cell culture medium engineered for organ-on-a-chip (OoC), tissue-on-a-chip (ToC), and microphysiological system (MPS) applications. A quadruple-stage train (0.1 µm ×2 + 0.04 µm ×2) reaches a 0.04 µm final cut-off, five times finer than the 0.22 µm membranes used for conventional sterile filtration.

  • Quadruple-stage nano-filtration: 0.1 µm (Prefiltration I & II) + 0.04 µm (Final filtration I & II), reaching a 0.04 µm final cut-off
  • Endotoxin release specification: < 0.05 EU/mL (USP <85> BET, tested per manufacturing batch)
  • DMEM/F-12 (1:1) base with 15 mM HEPES buffering; formulated without L-glutamine and without sodium bicarbonate — pH 7.4
  • Prepared with Ultrapure Type 1 water (18.2 MΩ·cm)
  • Aseptic fill & finish in an ISO Class 5 environment under an ISO 13485:2016 quality management system
  • Mycoplasma risk mitigated via 0.1 µm mycoplasma-retentive filtration (not tested per lot)
  • Phenol red present (8.630 mg/L) for visual pH monitoring — not compatible with phenol red-free assay platforms (e.g., Agilent Seahorse XF)
  • Custom formulations available — pH, glucose, salts, HEPES, and nutrient composition on request
DCP-DM12H-QBT1X |Pack Sizes: 500 mL, 1000 mL |Cell Culture Media UNSPSC: 41116155 | Commodity: Molecular biology and cell culture growth media | (UNv260801)
Dulbecco’s Modified Eagle Medium/ Ham's F-12 Nutrient Mixture (DMEM/F-12) (1:1) with 15mM HEPES w/o L-Glutamine, Sodium Bicarbonate: 1X Liquid
  • Glucose3151 mg/L (3.151 g/L)
  • L-GlutamineNot present — supplement as needed
  • Sodium Pyruvate110 mg/L
  • HEPES3574.5 mg/L (15 mM)
  • pH (USP <791>)7.4
  • Osmolality (USP <785>)See CoA (lot-specific)
  • Endotoxin (USP <85>)< 0.05 EU/mL
  • Filtration0.1 µm ×2 + 0.04 µm ×2
  • Storage2–8°C, protect from light
  • Shelf Life12 months from date of manufacture, unopened
ISO 13485:2016 USP <85> <785> <788> RUO
Why FluxMPS™

Engineered where standard media fails

Conventional 0.22 µm-filtered media carry mycoplasma-sized particulates (0.2–0.3 µm), subvisible debris, and variable endotoxin load that accumulate inside microchannels — corrupting biosensor readings and shortening device lifetimes. FluxMPS™ addresses these failure modes through a validated multi-stage filtration process.

filter_alt

Microchannel-safe purity

0.04 µm final filter retains particulates to sub-mycoplasma size; USP <788> Method 1 particulate compliance confirmed per released batch.

target

Total metabolic control

Defined glucose (3151 mg/L) and sodium pyruvate (110 mg/L) levels support precise metabolic flux experiments and Warburg-effect research protocols.

water_drop

Ultrapure-grade water

Prepared with Type 1 water (18.2 MΩ·cm, ASTM D1193 / ISO 3696) with rigorous trace-metal and organic-carbon (TOC) control.

visibility

Low background for imaging

Low particulate baseline supports confocal microscopy and biosensor integration; TEER measurements are governed primarily by electrolyte composition and monolayer integrity rather than water purity alone.

science

Rich, stable nutrient profile

Micro-batch precision locks in amino acid and vitamin concentrations for lot-to-lot reproducibility in long-term perfusion studies.

tune

Customization on demand

pH, glucose, salts, HEPES, and full nutrient composition available on request. Contact support@diagnocine.com.

Purity Architecture

Quadruple-stage filtration system

FluxMPS™ Dulbecco’s Modified Eagle Medium/ Ham's F-12 Nutrient Mixture (DMEM/F-12) (1:1) with 15mM HEPES w/o L-Glutamine, Sodium Bicarbonate: 1X Liquid is processed through a four-stage serial filtration sequence (0.1 µm → 0.04 µm → 0.1 µm → 0.04 µm) reaching a 0.04 µm final cut-off — substantially reducing particulate load relative to single-pass 0.22 µm filtration used in conventional media.

  1. 1

    0.1 µm Prefiltration I

    Removes large particulates and aggregates; protects the first 0.04 µm final filter cartridge and extends filter life.

  2. 2

    0.04 µm Final filtration I

    First 0.04 µm pass; retains sub-micron particulates and material in the mycoplasma size range (0.2–0.3 µm) that a 0.22 µm filter does not.

  3. 3

    0.1 µm Prefiltration II

    Second, dedicated prefilter stage protecting the second 0.04 µm cartridge from residual particulate load.

  4. 4

    0.04 µm Final filtration II — Polish

    Ultimate polishing filtration prior to aseptic fill & finish in a validated ISO Class 5 laminar-flow workstation.

Performance vs. conventional media

Four sequential stages reaching a 0.04 µm final cut-off deliver approximately 5× cleaner media by particulate count compared to single-pass 0.22 µm filtration, with USP <788> Method 1 compliance confirmed on each released batch.

5×
 
0.04
µm final filter pore size — sub-mycoplasma polishing
Sterility assurance: Every lot undergoes 14-day USP <71> sterility testing. Mycoplasma risk is mitigated via 0.1 µm mycoplasma-retentive filtration (not tested per lot).
Grade: This product is Microfluidics Suitable, filtered to a 0.04 µm final cut-off. It is not an MPS Grade product — that designation is reserved for the 0.01 µm ultra nano-filtered line, which adds 0.02 µm and 0.01 µm stages after the 0.04 µm polish. For applications requiring the 0.01 µm cut-off, contact support@diagnocine.com.
FluxMPS™ Dulbecco’s Modified Eagle Medium/ Ham's F-12 Nutrient Mixture (DMEM/F-12) (1:1) with 15mM HEPES w/o L-Glutamine, Sodium Bicarbonate: 1X Liquid (DCP-DM12H-QBT1X) Quadruple-stage filtration system: 0.1 μm Prefiltration I, 0.04 μm Final filtration I, 0.1 μm Prefiltration II, 0.04 μm Final filtration II for organ-on-a-chip and microfluidic applications by Diagnocine
Figure 1. FluxMPS™ Quadruple-stage filtration architecture (0.1 µm ×2 + 0.04 µm ×2).
© Diagnocine® — DCP-DM12H-QBT1X
Applications

Designed for next-generation cell culture platforms

FluxMPS™ Dulbecco’s Modified Eagle Medium/ Ham's F-12 Nutrient Mixture (DMEM/F-12) (1:1) with 15mM HEPES w/o L-Glutamine, Sodium Bicarbonate: 1X Liquid is suited to organ-on-a-chip, metabolic research, live-cell imaging, and primary cell models where particulate contamination and endotoxin variation must be minimized.

Automated Bioreactors & Robotics

Next-Generation System Uptime

An optional 0.01 µm (10 nm) ultra nano-filtered MPS Grade variant is available for automated bioreactor and robotic perfusion systems requiring the ultimate particulate exclusion.

  • Total Particulate Exclusion: 0.01 µm filtration for nanoscale valve and sensor protection
  • Valve & Sensor Protection: reduces particulate-induced blockage risk in precision fluidic systems
  • Extended Perfusion Stability: supports flow rate consistency across multi-week automated runs

Inquiry Required: Contact support@diagnocine.com to request the 0.01 µm MPS Grade variant.

Microfluidics

Micro Physiological System (MPS) & Chip

Ultra-filtered formulation reduces microchannel clogging risk and supports laminar flow integrity.

OoCToCBoCLoCMPS
Cancer Biology

Warburg Effect & Metabolic Research

Defined carbon source (3151 mg/L glucose) and low-endotoxin release specification support precise metabolic flux analysis.

MCF-7MDA-MB-231HeLaHT-1080
Stem Cell Biology

iPSC-Derived Models

Ultrapure formulation supports sensitive iPSC differentiation protocols where endotoxin variation can cause off-target effects.

iPSC-NeuronsiPSC-CMiPSC-Hep
Vascular Biology

Endothelial & Primary Cells

Microchannel-safe purity supports endothelial barrier integrity assessments and TEER-based assays.

HUVECsBHK-21Primary fibroblasts
Metabolomics

Metabolic Flux Analysis

Chemically defined base supports isotope tracing studies. Not compatible with Agilent Seahorse XF assays, which require bicarbonate-free, phenol red-free medium.

13C tracingNMR metabolomics
Live-Cell Imaging

Microscopy & Optical Sensing

Ultra-low particulate load supports confocal microscopy and biosensor integration for long-term live-cell studies.

ConfocalBiosensorsTEER
Technical Specifications

Lot-release quality parameters

Every production lot of FluxMPS™ Dulbecco’s Modified Eagle Medium/ Ham's F-12 Nutrient Mixture (DMEM/F-12) (1:1) with 15mM HEPES w/o L-Glutamine, Sodium Bicarbonate: 1X Liquid undergoes the complete quality-release battery below before shipment.

Physical & Chemical Parameters
Parameter Specification
Formulation DMEM/F-12 (1:1) base; contains HEPES, Phenol Red, Calcium, Magnesium, Glucose, Sodium Pyruvate; without L-Glutamine and without Sodium Bicarbonate
Appearance Red-colored, clear solution
pH USP <791> 7.4
Osmolality USP <785> See CoA (lot-specific)
Glucose 3151 mg/L (3.151 g/L)
L-Glutamine Not present — supplement as needed
Sodium Pyruvate 110 mg/L
HEPES 3574.5 mg/L (15 mM)
Phenol Red 8.630 mg/L (present)
Sterility, Purity & Safety Parameters
Parameter Specification
Endotoxin USP <85> BET < 0.05 EU/mL
Sterility USP <71> No growth after 14 days
Mycoplasma 0.1 µm mycoplasma-retentive filtration (not tested per lot)
Particulate ≥10 µm USP <788> Method 1 Compliant
Particulate ≥25 µm USP <788> Method 1 Compliant
Water Purity USP <85> Ultrapure Type 1, 18.2 MΩ·cm
Manufacturing std. ISO 13485 ISO 13485:2016
Fill environment ISO Class 5 (Class 100)
Storage, Handling & Logistics
Parameter Specification
Storage temperature 2–8°C, protected from light
Freeze-thaw Not recommended
Shelf life 12 months from date of manufacture, unopened
Shipping condition Cold pack
CO₂ requirement HEPES-buffered; reduced CO₂ dependence (validate per cell line)
Raw Materials & Regulatory Traceability
Parameter Specification
Raw material grade Cell culture / reagent grade
Traceability Full lot documentation, CoA available
Manufacturing QMS ISO 13485:2016 certified
UNSPSC 41116155 — Molecular biology and cell culture growth media (UNv260801)
Regulatory alignment 21 CFR Part 820 (QMSR) aligned
Production method Micro-batch precision manufacturing
Intended use For Research Use Only (RUO)
Formulation

Full composition (mg/L)

This formulation contains 51 defined components across four categories — Inorganic Salts, Amino Acids, Vitamins, and Others — reproduced in full below with CAS numbers where available. Custom compositions available on request.

Component CAS Number mg/L
INORGANIC SALTS
Calcium chloride dihydrate 10035-04-8 154.500
Copper sulphate pentahydrate 7758-99-8 0.0013
Disodium hydrogen phosphate 7558-79-4 71.020
Ferric nitrate nonahydrate 7782-61-8 0.050
Ferrous sulphate heptahydrate 7782-63-0 0.417
Magnesium chloride hexahydrate 7791-18-6 61.200
Magnesium sulphate anhydrous 7487-88-9 48.840
Potassium chloride 7447-40-7 311.800
Sodium chloride 7647-14-5 6996.000
Sodium dihydrogen phosphate monohydrate 10049-21-5 54.300
Zinc sulphate heptahydrate 7446-20-0 0.432
Component CAS Number mg/L
AMINO ACIDS
Glycine 56-40-6 18.750
L-Alanine 56-41-7 4.450
L-Arginine hydrochloride 1119-34-2 147.500
L-Asparagine monohydrate 5794-13-8 7.500
L-Aspartic acid 56-84-8 6.650
L-Cysteine dihydrochloride 7048-04-6 31.290
L-Cystine hydrochloride monohydrate   17.560
L-Glutamic acid 56-86-0 7.350
L-Histidine hydrochloride monohydrate 5934-29-2 31.480
L-Isoleucine 73-32-5 54.470
L-Leucine 61-90-5 59.050
L-Lysine hydrochloride 657-27-2 91.250
L-Methionine 63-68-3 17.240
L-Phenylalanine 63-91-2 35.480
L-Proline 147-85-3 17.250
L-Serine 56-45-1 26.250
L-Threonine 72-19-5 53.450
L-Tryptophan 73-22-3 9.020
L-Tyrosine disodium salt 69847-45-6 48.100
L-Valine 72-18-4 52.850
Component CAS Number mg/L
VITAMINS
Choline chloride 67-48-1 8.980
D-Biotin 58-85-5 0.0035
D-Ca-Pantothenate 137-08-6 2.240
Folic acid 59-30-3 2.660
Nicotinamide 98-92-0 2.020
Pyridoxal hydrochloride 65-22-5 2.000
Pyridoxine hydrochloride 58-56-0 0.031
Riboflavin 83-88-5 0.219
Thiamine hydrochloride 67-03-8 2.170
Vitamin B12 68-19-9 0.680
OTHERS
D-Glucose 50-99-7 3151.000
DL-Thioctic acid 1200-22-2 0.105
HEPES buffer 7365-45-9 3574.500
Hypoxanthine sodium salt   2.400
Linoleic acid 60-33-3 0.042
myo-Inositol 87-89-8 12.600
Phenol red sodium salt 34487-61-1 8.630
Putrescine hydrochloride   0.081
Sodium pyruvate 113-24-6 110.000
Thymidine 50-89-5 0.365
Customization: pH, glucose, salt balance, HEPES, and full nutrient profile available on request. Contact support@diagnocine.com.
Quality Assurance

ISO 13485:2016 manufacturing & compliance

Manufactured under an ISO 13485:2016 quality management system with final packaging, testing, and customization at Diagnocine, Totowa, New Jersey, USA.

verified

ISO 13485:2016 QMS

Full quality management system certification covering manufacturing, testing, and release for every production lot.

water_drop

Ultrapure Type 1 Water

Media prepared with 18.2 MΩ·cm resistivity water meeting USP <85> conductivity standards.

biotech

ISO Class 5 Fill & Finish

Aseptic filling in a validated ISO Class 5 laminar-flow workstation; 21 CFR Part 820 (QMSR) aligned.

assignment

Micro-Batch Precision

Small-batch manufacturing supports lot-to-lot nutrient consistency for reproducible perfusion studies.

Batch-level quality control. Endotoxin is controlled per manufacturing batch rather than per unit. Every batch is tested before release and must meet the release specification:
  • Endotoxin — LAL assay, USP <85> Bacterial Endotoxins Test; assay sensitivity 0.005 EU/mL; release specification < 0.05 EU/mL
  • pH, osmolality, conductivity, appearance and clarity
  • Sterility
A Certificate of Analysis is available on request.

Endotoxin — USP <85> BET

LAL assay per batch. Release specification: < 0.05 EU/mL.

Particulate — USP <788> Method 1

Light obscuration particle count confirms ≥10 µm and ≥25 µm compliance per released batch.

Osmolality — USP <785>

Freezing-point osmometry per USP <785>. Result: See CoA.

Documentation — CoA & Full Lot Records

Certificate of Analysis with full QC panel, traceability, and release signatures for every lot.

Certificate of Analysis: Request via support@diagnocine.com with your lot number.
Product Comparison

How DCP-DM12H-QBT1X (FluxMPS™) compares

Side-by-side comparison against conventional 0.22 µm-filtered alternatives of the same base formulation.

Parameter DCP-DM12H-QBT1X (FluxMPS™) Conventional DMEM/F-12 (0.22 µm) Standard DMEM/F-12 alternative
Grade Microfluidics Suitable (0.04 µm cut-off) Not specified Not specified
Base Formulation DMEM/F-12 (1:1), 15 mM HEPES, w/o L-Glutamine & Sodium Bicarbonate DMEM/F-12 Standard DMEM/F-12 Equivalent
Final filtration pore size 0.04 µm 0.22 µm 0.22 µm
Number of filtration stages 4 stages 1 stage 1–2 stages
Mycoplasma-retentive filtration check_circle cancel cancel
Endotoxin (release specification) FluxMPS™ — < 0.05 EU/mL Corning classical liquid media — < 0.25 EU/mL
Sigma-Aldrich DMEM complete medium — ≤ 2 EU/mL
Gibco classical DMEM — Not specified (recorded per lot)
USP particulate compliance check_circle USP <788> Method 1 cancel cancel
Water quality Ultrapure Type 1 (18.2 MΩ) Purified water Purified water
Manufacturing QMS ISO 13485:2016 Variable Variable
Microfluidic channel compatibility check_circle Validated cancel Higher clogging risk cancel Higher clogging risk
Custom formulation check_circle On request cancel Limited

Comparison figures from published supplier specifications, accessed 2 September 2026. Suppliers that publish no numeric endotoxin specification are shown as "Not specified".

FAQ

Frequently asked questions

Common questions about FluxMPS™ Dulbecco’s Modified Eagle Medium/ Ham's F-12 Nutrient Mixture (DMEM/F-12) (1:1) with 15mM HEPES w/o L-Glutamine, Sodium Bicarbonate: 1X Liquid and Microfluidics Suitable cell culture media.

Yes. DCP-DM12H-QBT1X is Microfluidics Suitable, processed through our Quadruple-stage filtration system (0.1 µm ×2 + 0.04 µm ×2), delivering ultra-low particulate counts that reduce microchannel clogging risk in OoC and MPS devices.
Standard 0.22 µm filtration does not retain material in the mycoplasma size range (0.2–0.3 µm) or finer subvisible particulates. FluxMPS™ uses four sequential stages reaching 0.04 µm, delivering approximately 5× lower particulate counts per USP <788> Method 1.
L-Glutamine is unstable in liquid storage and degrades over time, so it is left out and added fresh at time of use. Supplement with L-Glutamine (typically 2–4 mM) or a stabilized dipeptide alternative immediately before use. Contact support@diagnocine.com for a custom pre-supplemented formulation.
This formulation is HEPES-buffered and bicarbonate-free, which reduces CO₂ dependence. Standard 5–10% CO₂ incubation remains compatible; validate against your specific cell line and assay conditions.
Yes. This medium can be supplemented with FBS (5–20%), growth factors, antibiotics, or other additives per standard practice, added immediately before use. When filtering serum or protein-containing additions, use a 0.2 µm low-protein-binding PES or PVDF filter — never a 0.04 µm membrane, which retains immunoglobulins, lipoproteins, and much of the functional serum fraction.
Endotoxin is controlled per manufacturing batch, not per unit. Every batch is tested by LAL assay per USP <85> Bacterial Endotoxins Test (assay sensitivity 0.005 EU/mL) and must meet the release specification of < 0.05 EU/mL before release. Lot-specific results are provided in the Certificate of Analysis, available from support@diagnocine.com.
Yes. A lot-specific CoA is available for every shipment and includes: appearance, pH (USP <791>), osmolality (USP <785>), endotoxin (USP <85> BET), sterility (USP <71>), particulate matter (USP <788> Method 1), raw material traceability, manufacturing date, lot number, expiry, and authorized release signatures. Request via support@diagnocine.com.
Scientific References

Supporting literature

Peer-reviewed publications supporting ultra-filtered, Microfluidics Suitable media and microfluidic cell culture applications.

  1. Huh D et al. (2010). Reconstituting organ-level lung functions on a chip. Science, 328(5986), 1662–1668. doi:10.1126/science.1188302
  2. Bhatia SN & Ingber DE (2014). Microfluidic organs-on-chips. Nature Biotechnology, 32(8), 760–772. doi:10.1038/nbt.2989
  3. Eagle H (1959). Amino acid metabolism in mammalian cell cultures. Science, 130(3373), 432–437. doi:10.1126/science.130.3373.432
  4. Bhattacharya S et al. (2018). Challenges in maintaining cell viability during microfluidic experiments. Electrophoresis, 39(7), 997–1006. doi:10.1002/elps.201700375
  5. Zhang YS et al. (2017). Multisensor-integrated organs-on-chips platform for automated in situ monitoring. PNAS, 114(12), E2293–E2302. doi:10.1073/pnas.1612906114
  6. Vernetti L et al. (2017). Functional coupling of human microphysiology systems. Scientific Reports, 7, 42296. doi:10.1038/srep42296
  7. Esch EW et al. (2015). Organs-on-chips at the frontiers of drug discovery. Nature Reviews Drug Discovery, 14(4), 248–260. doi:10.1038/nrd4539
  8. Zheng F et al. (2021). Organ-on-a-chip systems: microengineering to biomimic living systems. Small, 17(7), 2004175. doi:10.1002/smll.202004175

Satisfaction
Quality Rating
Value Rating
Style Rating
X