UltraClean PVSA-MOPS, 1X

Product#: DCP-MOPSPVSA1X
$55.00
DCP-MOPSPVSA1X
Availability:
Ships in 24 hours

MPS-Grade RNase-Safe Buffer
ISO 13485-Certified Manufacturing

FluxMPS™ UltraClean PVSA-MOPS, 1X

A ready-to-use, MPS-grade 1X MOPS buffer engineered for RNase-safe handling of RNA and DNA. Supplemented with polyvinylsulfonic acid (PVSA), a potent polymeric RNase inhibitor, and purified through quadruple-stage 0.1 µm and 0.04 µm membrane filtration (each applied twice) for ultra-clean, microchannel-safe performance in molecular biology and microfluidic workflows.

  • Quadruple-stage filtration: 0.1 µm membrane (twice) and 0.04 µm membrane (twice) for ultra-clean, mycoplasma-safe purity
  • Supplemented with polyvinylsulfonic acid (PVSA), a potent polymeric RNase inhibitor
  • Defined 20 mM MOPS buffering system at pH 7.4
  • Manufactured with ultrapure, nuclease-free Type 1 water (18.2 MΩ·cm)
  • Sterile, ready-to-use 1X formulation — no preparation required
  • Manufactured under ISO 13485-certified, CE-approved facilities
  • Customization available: alternate concentrations, additives, and pH on inquiry
SKU: DCP-MOPSPVSA1X · UNSPSC 12352204 Nucleic Acids — RNA Works Buffers
UltraClean PVSA-MOPS, 1X — RNase-Safe MOPS Buffer
  • Catalog No.DCP-MOPSPVSA1X
  • pH7.4
  • Molarity (MOPS)20 mM
  • RNase Inhibitor (PVSA)1 g/L
  • Water QualityUltrapure, nuclease-free
  • Filtration0.1 µm x2 + 0.04 µm x2
  • SterilitySterile
  • Storage2-8°C, do not freeze
  • Shelf Life12 months
  • FormatReady-to-use 1X
ISO 13485:2016 USP <85> <785> <788> RUO
Why FluxMPS™

Engineered where standard MOPS buffers fail

Conventional 0.22 µm-filtered buffers can carry subvisible particulates, adventitious nucleases, and microbial bioburden that compromise RNA integrity and accumulate in microfluidic channels. UltraClean PVSA-MOPS, 1X addresses each failure mode directly with a defined buffering system, an active RNase inhibitor, and multi-stage sub-0.1 µm filtration.

filter_alt

Microchannel-Safe Purity

Sequential 0.1 µm and 0.04 µm membrane filtration, each stage applied twice, reduces particulate load beyond a single-pass 0.22 µm filtration commonly used in standard MOPS buffer.

target

Precise, Stable Buffering

Defined 20 mM MOPS concentration delivers consistent, near-physiological buffering at pH 7.4 for reproducible sample handling.

water_drop

Ultrapure-Grade Water

Formulated with ultrapure, nuclease-free Type 1 water (18.2 MΩ·cm) to minimize background contamination in nucleic acid workflows.

visibility

RNase-Safe, Low-Background Handling

Polyvinylsulfonic acid (PVSA) provides robust, broad-spectrum RNase inhibition, reducing reliance on protein-based inhibitors during handling and short-term storage.

science

Defined, Traceable Composition

MOPS, PVSA, and water content are formulated to declared concentrations and manufactured under a controlled quality process.

tune

Customization On Demand

Alternate concentrations, additional chemicals, compounds, proteins, supplements, or pH values available upon inquiry.

Purity Architecture

Quadruple-stage filtration system

Every lot of UltraClean PVSA-MOPS, 1X is filtered through a 0.1 µm membrane twice and a 0.04 µm membrane twice — a quadruple-stage architecture that supports ultra-clean, RNase-safe, mycoplasma-safe buffer for sensitive RNA and DNA workflows.

  1. 1

    0.1 µm Pre-filtration I

    Removes large particulates and aggregates, extending the service life of downstream filtration stages.

  2. 2

    0.04 µm Pre-filtration II

    Retains fine particulates and bioburden ahead of the final sterile-filtration pass.

  3. 3

    0.1 µm Sterile-filtration I

    Second-pass redundancy through a 0.1 µm membrane reinforces particulate and bioburden control.

  4. 4

    0.04 µm Sterile-filtration II — Final Polish

    Final 0.04 µm polish, performed under an aseptic fill process, helps prevent mycoplasma contamination; the smallest known mycoplasma species is approximately 0.2 micron.

Performance vs. conventional buffer

Sequential 0.1 µm and 0.04 µm filtration, each applied twice, removes finer particulates than a single-pass 0.22 µm filtration typically used in standard MOPS buffer preparations.

0.04 µm
Final filtration stage
4
Total filtration stages
All DiagnoCine Precision sterile buffers are filter-sterilized with 0.1-micron and 0.04-micron filtration, each applied twice, helping prevent mycoplasma contamination.
DCP-MOPSPVSA1X UltraClean PVSA-MOPS quadruple-stage 0.1 micron and 0.04 micron filtration diagram for RNase-safe RNA and DNA buffer used in microfluidic and organ-on-a-chip workflows by Diagnocine
Figure 1. Quadruple-stage filtration architecture (0.1 µm twice, 0.04 µm twice) used in the manufacture of UltraClean PVSA-MOPS, 1X.
© Diagnocine® — DCP-MOPSPVSA1X
Applications

Where UltraClean PVSA-MOPS, 1X is used

Formulated for RNA and DNA resuspension, short-term storage, and general molecular biology procedures that specify a 1X MOPS buffer with added RNase protection.

Automated Bioreactors & Robotics

Next-Generation System Uptime

For automated, high-throughput microfluidic and robotic liquid-handling systems, an optional 0.01 µm (10 nm) ultra-filtered variant of this buffer is available on request to further minimize particulate load in sensitive valve and sensor pathways.

  • Total Particulate Exclusion: Finer filtration threshold for the most particulate-sensitive automated workflows.
  • Valve & Sensor Protection: Reduces the risk of particulate accumulation in microfluidic valves and inline sensors.
  • Extended Perfusion Stability: Supports longer unattended run times in automated perfusion setups.

Inquiry Required: Contact support@diagnocine.com to request the 0.01 µm ultra-filtered grade of this buffer.

Microfluidics

Micro Physiological System (MPS) & Chip

MOPS-buffered, RNase-safe solution suitable for washing and handling steps in microfluidic chip-based systems where RNA integrity matters.

OoCToCBoCLoCMPS
Sample Preparation

RNA & DNA Resuspension and Dilution

Resuspension and dilution of purified nucleic acids in a MOPS-based buffer with added RNase protection for storage or downstream analysis.

LysisDilutionReconstitutionRinse
Stem Cell Biology

iPSC-Derived Model Handling

Near-neutral, zwitterionic buffering suitable for gentle handling steps in workflows involving iPSC-derived cell models where RNA quality is a priority.

iPSC-NeuronsiPSC-CMiPSC-Hep
Vascular Biology

Endothelial & Primary Cell Processing

Buffering solution for gentle handling or washing of cells and tissues in workflows where RNA integrity is important and MOPS is specified.

HUVECsHAECsPrimary hepatocytes
Immunoassays

Sample Handling for Enzymatic Assays

Handling and transfer of nucleic acids prior to downstream applications such as RT, qPCR, and library prep, as compatible with enzyme- and salt-specific requirements.

ELISAWestern blotIHCIF
Molecular Biology

General MOPS-Buffered RNA/DNA Procedures

Any procedure requiring 1X MOPS with enhanced RNA protection under controlled, near-physiological pH conditions.

ConfocalBiosensorsTEER
Technical Specifications

Full specification sheet

Parameters as formulated and manufactured for UltraClean PVSA-MOPS, 1X.

Physical & Chemical Parameters
Parameter Specification
Formulation / Composition MOPS 20 mM, PVSA 1 g/L, ultrapure nuclease-free water to volume
Appearance Colorless, clear solution; free of visible particulates
pH (USP <791>) 7.4
Molarity / Concentration MOPS 20 mM
Sterility, Purity & Safety Parameters
Parameter Specification
Filtration USP <788> 0.1-micron membrane (twice) and 0.04-micron membrane (twice)
Sterility Sterile
RNase Protection PVSA (Polyvinylsulfonic Acid), 1 g/L
Water Quality USP <85> Ultrapure, nuclease-free Type 1 water
Manufacturing Standard ISO ISO 13485-certified, CE-approved facility
Storage, Handling & Logistics
Parameter Specification
Storage Temperature 2-8°C
Freeze-Thaw Do not freeze
Shelf Life 12 months
Raw Materials & Regulatory Traceability
Parameter Specification
Raw Material Grade Molecular biology-grade MOPS and PVSA
Manufacturing QMS ISO 13485 ISO 13485-certified facility
Regulatory Alignment CE-approved facility
Production Method 0.1-micron membrane (twice) and 0.04-micron membrane (twice); ready-to-use 1X
Traceability Final packaging, quality assurance, and customization performed at DiagnoCine Precision, Totowa, New Jersey, USA
Intended Use Research Use Only (RUO)
Formulation

Full composition

MOPS-buffered formulation supplemented with the polymeric RNase inhibitor PVSA; component concentrations are controlled per manufacturing lot.

Component CAS Number Concentration
MOPS 1132-61-2 20 mM
PVSA (Polyvinylsulfonic Acid)   1 g/L
Water (Ultrapure, nuclease-free) 7732-18-5 To volume
CUSTOMIZATION: Please inquire at support@diagnocine.com if other concentrations, additions of chemicals, compounds, proteins, or supplements, different pH, or other modifications are needed.
Quality Assurance

Manufacturing & compliance

UltraClean PVSA-MOPS, 1X is manufactured under an ISO 13485-certified, CE-approved quality system, with final packaging, quality assurance, and testing performed at the DiagnoCine R&D and Quality Testing Center.

verified

ISO 13485:2016 QMS

Manufactured under an ISO 13485-certified and CE-approved quality management system.

water_drop

Ultrapure Type 1 Water

Formulated with ultrapure, nuclease-free Type 1 water (18.2 MΩ·cm).

biotech

ISO Class 5 Fill & Finish

Aseptic fill process supports the sterile, ready-to-use 1X format.

assignment

Micro-Batch Precision

Customization requests and assembly performed at DiagnoCine Precision, Totowa, New Jersey, USA.

Filtration Verification USP <788>

Particulate control supported by 0.1-micron and 0.04-micron membrane filtration, each applied twice.

Sterility Assurance

Quadruple-stage membrane filtration helps prevent mycoplasma and microbial contamination.

Water Quality USP <85>

Manufactured with ultrapure, nuclease-free water to minimize background contamination.

Documentation / CoA

Lot-specific documentation is available upon request.

A Certificate of Analysis (CoA) is available for this lot upon request — contact support@diagnocine.com.
Product Comparison

How DCP-MOPSPVSA1X compares

A side-by-side view of UltraClean PVSA-MOPS, 1X against conventional MOPS buffer preparations.

Parameter DCP-MOPSPVSA1X (FluxMPS™) Conventional MOPS Buffer Standard Alternative
RNase Protection (PVSA) check_circle cancel cancel
Final Filtration Pore Size 0.04 µm 0.22 µm 0.22 µm
Number of Filtration Stages 4 1 1
Sterile check_circle cancel check_circle
Water Quality Ultrapure Type 1 Standard grade Standard grade
ISO 13485-Certified Manufacturing check_circle cancel cancel
Microfluidic / OoC Compatibility check_circle cancel cancel
Custom Formulation Available check_circle cancel cancel
FAQ

Frequently asked questions

Common questions about UltraClean PVSA-MOPS, 1X.

Yes. Its quadruple-stage 0.1 µm / 0.04 µm filtration and RNase-safe formulation make it suitable for RNA/DNA handling steps in microfluidic and organ-on-a-chip workflows where sample integrity and low particulate load are important.
Each 500 mL or 1000 mL lot passes through a 0.1-micron membrane twice and a 0.04-micron membrane twice, a sequential four-stage process that removes finer particulates than a single 0.22 µm pass used in conventional MOPS buffer.
The buffer is supplied at pH 7.4 with 20 mM MOPS and 1 g/L PVSA. Alternate concentrations, additional chemicals, compounds, proteins, supplements, or different pH values can be produced on inquiry.
The product specification lists pH 7.4; a specific measurement temperature is not stated. The buffer should be stored at 2-8°C, not frozen, and used within its 12-month shelf life to maintain formulation integrity.
Yes. Additions of chemicals, compounds, proteins, or supplements can be accommodated as a custom formulation — contact support@diagnocine.com to discuss requirements.
A specific endotoxin specification is not listed for this product. Lot-specific quality documentation, including any available testing data, can be requested through a Certificate of Analysis.
Yes. A lot-specific CoA is available upon request from support@diagnocine.com, covering appearance, pH, and manufacturing details recorded for that lot.
Scientific References

Supporting literature

Curated references relevant to MOPS buffer chemistry, RNase inhibition, and microfluidic RNA handling.

  1. Good, N.E., et al. Hydrogen ion buffers for biological research. Biochemistry. doi:10.1021/bi00866a011
  2. Good, N.E., Izawa, S. Hydrogen ion buffers. Methods in Enzymology. doi:10.1016/S0076-6879(72)24054-X
  3. Blackburn, P., Moore, S. Pancreatic ribonuclease. The Enzymes. doi:10.1016/S1874-6047(08)60406-5
  4. Chirgwin, J.M., et al. Isolation of biologically active ribonucleic acid from sources enriched in ribonuclease. Biochemistry. doi:10.1021/bi00591a005
  5. Bhattacharyya, D., et al. Polyanion-mediated inhibition of ribonucleases. Journal of Molecular Biology. doi:10.1016/0022-2836(92)90999-6
  6. Bhatia, S.N., Ingber, D.E. Microfluidic organs-on-chips. Nature Biotechnology. doi:10.1038/nbt.2989
  7. Zhang, B., et al. Organ-on-a-chip devices advance to market. Lab on a Chip. doi:10.1039/C6LC00450D
  8. Rio, D.C., et al. RNA: A Laboratory Manual. Cold Spring Harbor Laboratory Press. doi:10.1101/pdb.top078725
  9. Farrell, R.E. RNA Methodologies: Laboratory Guide for Isolation and Characterization. Academic Press. doi:10.1016/C2009-0-64150-2
  10. Halder, S., et al. Endotoxin and nuclease control in reagent manufacturing for cell-based assays. Applied Biosafety. doi:10.1177/1535676019878780

Satisfaction
Quality Rating
Value Rating
Style Rating
X