UltraClean PVSA-PBS, 1X

Product#: DCP-PBSPVSA1X
$67.54
DCP-PBSPVSA1X
Availability:
Ships in 24 hours

Product Overview
ISO 13485-Certified & CE-Approved Manufacturing

FluxMPS™ UltraClean PVSA-PBS, 1X — RNase-Safe Phosphate Buffered Saline

UltraClean PVSA-PBS, 1X is an MPS-grade, ready-to-use phosphate buffered saline supplemented with polyvinylsulfonic acid (PVSA), a potent polymeric RNase inhibitor formulated to protect RNA integrity during handling, washing, and storage. Manufactured to precise, stable pH and defined molarity, it is quadruple-stage filtered through 0.1 µm and 0.04 µm membranes — each pass applied twice — for microchannel-safe use in RNA workflows, organ-on-a-chip (OoC), and microphysiological system (MPS) applications.

  • Quadruple-stage filtration: 0.1 µm membrane twice and 0.04 µm membrane twice
  • RNase-safe formulation via PVSA (polyvinylsulfonic acid) supplementation
  • Isotonic, physiological pH 7.4
  • Free of added calcium and magnesium
  • Formulated with ultrapure, nuclease-free water
  • Ready-to-use 1X solution — no dilution or mixing required
  • Manufactured under ISO 13485-certified, CE-approved facilities
  • Customization available on request — contact support@diagnocine.com
DCP-PBSPVSA1X | 12352204 UNSPSC Nucleic Acids — RNA Works Buffers
UltraClean PVSA-PBS, 1X — RNase-Safe PBS Buffer
  • pH7.4
  • FormulationPBS + PVSA (RNase-safe)
  • Buffer TypeIsotonic, physiological
  • Divalent CationsFree of added Ca2+/Mg2+
  • PVSA Concentration1 g/L
  • Water QualityUltrapure, nuclease-free (Type 1, 18.2 MΩ·cm)
  • Filtration0.1 µm x2 + 0.04 µm x2
  • Storage2–8°C, do not freeze
  • Shelf Life12 months
  • FormatReady-to-use 1X solution
ISO 13485:2016 USP <85> <785> <788> RUO
Why FluxMPS™

Engineered where standard PBS fails RNA-sensitive work

Conventional 0.22 µm-filtered PBS carries subvisible particulates, adventitious nucleases, and pH/ionic drift that can compromise RNA integrity and accumulate inside microfluidic channels. UltraClean PVSA-PBS, 1X is built to remove these failure modes at the source.[1,2]

filter_alt

Microchannel-safe purity

Final 0.04 µm pore size from a quadruple-stage filtration sequence minimizes particulate loading in microfluidic channels and OoC devices.

target

Precise, stable pH

Formulated at pH 7.4 with defined phosphate and chloride salt molarity for isotonic, physiological compatibility with cells and tissues.

water_drop

Ultrapure-grade water

Formulated with ultrapure, nuclease-free water (Type 1, 18.2 MΩ·cm) to minimize adventitious RNase and DNase carry-over.

visibility

Low background for RNA assays

RNase-safe formulation via PVSA supports cleaner backgrounds in RNA FISH, RT-qPCR, and RNA library prep workflows.[3]

science

Defined, traceable composition

Every salt and additive is lot-controlled and disclosed — NaCl, KCl, Na2HPO4, KH2PO4, and PVSA at declared concentrations.

tune

Customization on demand

Alternate concentrations, additional chemicals, compounds, proteins, supplements, or pH values are available by inquiry.

Purity Architecture

Quadruple-stage filtration system

UltraClean PVSA-PBS, 1X is sterile-filtered through a 0.1 µm membrane twice and a 0.04 µm membrane twice, a four-stage sequence engineered to minimize particulate load and exclude bioburden from RNA-sensitive preparations.

  1. 1

    0.1 µm Pre-filtration I

    First-pass removal of large particulates and aggregates, extending the service life of downstream membranes.

  2. 2

    0.04 µm Pre-filtration II

    Fine particulate and bioburden retention ahead of the second filtration pass.

  3. 3

    0.1 µm Sterile-filtration I

    Second-pass redundancy through a 0.1 µm membrane for consistent sterility assurance.

  4. 4

    0.04 µm Sterile-filtration II — Final Polish

    Final 0.04 µm polish helps exclude organisms as small as mycoplasma, the smallest of which can measure about 0.2 microns, supporting a mycoplasma-controlled buffer.

Performance vs. conventional buffer

Sequential 0.1 µm and 0.04 µm filtration, each applied twice, removes finer particulates than a single 0.22 µm pass typical of conventional PBS, without added calcium or magnesium that could otherwise activate nucleases or affect cell adhesion.

0.04 µm
Final filtration stage
4
Total filtration stages
Sterility assurance is supported by redundant 0.1 µm and 0.04 µm membrane filtration consistent with USP <71> sterility practices.
DCP-PBSPVSA1X UltraClean PVSA-PBS quadruple-stage 0.1 micron and 0.04 micron filtration diagram for RNase-safe organ-on-a-chip and microfluidic RNA workflows, Diagnocine
Figure 1. Quadruple-stage filtration architecture — 0.1 µm membrane twice and 0.04 µm membrane twice.
© Diagnocine® — DCP-PBSPVSA1X
Applications

Where UltraClean PVSA-PBS, 1X performs

An isotonic, RNase-safe 1X PBS formulated for RNA-sensitive molecular biology and cell biology workflows requiring strict nuclease control.

Automated Bioreactors & Robotics

Next-Generation System Uptime

For automated perfusion and robotic liquid-handling platforms, an optional 0.01 µm (10 nm) ultra-filtered variant of this buffer is available on request to further protect fine valves and sensors.

  • Total Particulate Exclusion for closed-loop perfusion systems
  • Valve & Sensor Protection in automated dispensing hardware
  • Extended Perfusion Stability for long-duration bioreactor runs

Inquiry Required: Contact support@diagnocine.com to request the 0.01 µm ultra-filtered grade of this buffer.

Microfluidics

Micro Physiological System (MPS) & Chip

Isotonic, RNase-safe PBS suited to microfluidic channels and RNA-containing preparations in chip-based systems.

OoCToCBoCLoCMPS
Sample Preparation

RNA Extraction and Purification

RNase-safe wash and resuspension buffer for columns, magnetic beads, or cell pellets in RNA isolation workflows.

LysisDilutionReconstitutionRinse
Stem Cell Biology

RNA Handling and Storage

Washing, resuspension, and temporary storage of RNA-containing samples, cells, or tissues where RNase control is critical.

iPSC-NeuronsiPSC-CMiPSC-Hep
Vascular Biology

General Molecular Biology & Gentle Cell Handling

Isotonic PBS with enhanced RNA protection for gentle handling of cells and primary tissue preparations.

HUVECsHAECsPrimary hepatocytes
Immunoassays

Immunostaining on RNA-Sensitive Samples

RNase-safe buffer for immunostaining steps performed alongside RNA-containing sample preparations.

ELISAWestern blotIHCIF
Live-Cell Imaging

RNA FISH / In Situ Hybridization

Preparation and washing of samples and probes in RNA fluorescence in situ hybridization and related hybridization assays.[4]

ConfocalBiosensorsTEER
Technical Specifications

Specifications at a glance

Values as declared for UltraClean PVSA-PBS, 1X (Cat. No. DCP-PBSPVSA1X).

Physical & Chemical Parameters
Parameter Specification
Formulation PBS supplemented with PVSA (RNase-safe)
Appearance Colorless, clear solution; free of visible particulates
pH USP <791> 7.4
Buffer salt molarity NaCl 137 mM; KCl 2.7 mM; Na2HPO4 10.1 mM; KH2PO4 1.76 mM
PVSA concentration 1 g/L
Divalent cations Free of added calcium and magnesium
Sterility, Purity & Safety Parameters
Parameter Specification
Sterility Sterile
Filtration system 0.1 µm membrane twice and 0.04 µm membrane twice
Water quality Ultrapure, nuclease-free water (Type 1, 18.2 MΩ·cm)
Manufacturing standard ISO 13485 ISO 13485-certified, CE-approved facilities
Storage, Handling & Logistics
Parameter Specification
Storage temperature 2–8°C
Freeze-thaw Do not freeze
Shelf life 12 months
Raw Materials & Regulatory Traceability
Parameter Specification
Raw material grade Molecular biology-grade components
Manufacturing QMS ISO 13485-certified
Regulatory alignment CE-approved facilities
Production & QA site Final packaging, QA, and testing at the Diagnocine R&D and Quality Testing Center; customization and assembly at Diagnocine Precision, Totowa, New Jersey, USA
Intended use Research Use Only (RUO)
Formulation

Full composition

Ready-to-use 1X buffer formulated from molecular biology-grade components with per-lot quality control.

Component CAS Number Concentration
Sodium Chloride (NaCl) 7647-14-5 137 mM
Potassium Chloride (KCl) 7447-40-7 2.7 mM
Sodium Phosphate Dibasic (Na2HPO4) 7558-79-4 10.1 mM
Potassium Phosphate Monobasic (KH2PO4) 7778-77-0 1.76 mM
PVSA (Polyvinylsulfonic Acid)   1 g/L
Water (Ultrapure, nuclease-free) 7732-18-5 To volume
Other concentrations, additions of chemicals, compounds, proteins, or supplements, different pH, and other modifications are available on request — contact support@diagnocine.com.
Quality Assurance

Manufacturing & compliance

Produced under a controlled quality system with per-lot verification prior to release.

verified

ISO 13485:2016 QMS

Manufactured under ISO 13485-certified, CE-approved facilities (suppliers of Diagnocine Precision).

water_drop

Ultrapure Type 1 Water

Formulated with ultrapure, nuclease-free water (18.2 MΩ·cm) to protect RNA integrity.

biotech

ISO Class 5 Fill & Finish

Final packaging, quality assurance, and testing performed at the Diagnocine R&D and Quality Testing Center.

assignment

Micro-Batch Precision

Customization and assembly for specific requests are accomplished at Diagnocine Precision in Totowa, New Jersey, USA.

RNase Control & Sterility USP <71>

PVSA-supplemented, sterile formulation for RNase-safe handling of RNA-containing preparations.

Filtration Validation

0.1 µm membrane twice and 0.04 µm membrane twice, preventing mycoplasma contamination.

pH Verification USP <791>

Formulated and verified at pH 7.4 for physiological compatibility.

Documentation & CoA

Certificate of Analysis available for lot-specific appearance, pH, and manufacturing data.

Request a Certificate of Analysis at support@diagnocine.com.
Product Comparison

How DCP-PBSPVSA1X compares

Comparing UltraClean PVSA-PBS, 1X against conventional 0.22 µm-filtered PBS formulations.

Parameter DCP-PBSPVSA1X (FluxMPS™) Conventional PBS (0.22 µm filtered) Standard Alternative (0.22 µm filtered)
RNase inhibition (PVSA) check_circle cancel cancel
Final filtration pore size 0.04 µm 0.22 µm 0.22 µm
Number of filtration stages 4 1 1
Divalent cation content Free of added Ca2+/Mg2+ Varies Varies
Water quality Ultrapure Type 1 (18.2 MΩ·cm) Standard purified water Standard purified water
Manufacturing QMS check_circle ISO 13485 cancel cancel
RNA workflow compatibility check_circle cancel cancel
pH reproducibility 7.4 defined Variable Variable
Custom formulation check_circle cancel cancel
FAQ

Frequently asked questions

Answers to common questions about UltraClean PVSA-PBS, 1X.

Yes. As an isotonic, RNase-safe PBS filtered through a quadruple-stage 0.1 µm / 0.04 µm process, it is manufactured for microchannel-safe, low-particulate use in organ-on-a-chip, tissue-on-a-chip, and other microfluidic RNA workflows.
The buffer is filtered through a 0.1 µm membrane twice followed by a 0.04 µm membrane twice, a quadruple-stage sequence that removes finer particulates than a single 0.22 µm pass and helps exclude organisms as small as mycoplasma.
The buffer is supplied at pH 7.4 with defined molarity (137 mM NaCl, 2.7 mM KCl, 10.1 mM Na2HPO4, 1.76 mM KH2PO4). Other concentrations, pH values, or added chemicals, compounds, proteins, or supplements can be arranged by inquiry to support@diagnocine.com.
The product specification lists pH 7.4 without a stated measurement temperature. The buffer should be stored at 2–8°C and not frozen, with a shelf life of 12 months under these conditions.
Yes. Diagnocine accepts customization requests for other concentrations, additions of chemicals, compounds, proteins, or supplements, different pH, and other modifications — contact support@diagnocine.com to inquire.
A numeric endotoxin value is not specified for this buffer. The product is manufactured as a sterile, ultrapure solution under ISO 13485-certified, CE-approved facilities; contact support@diagnocine.com for a Certificate of Analysis with lot-specific quality data.
Yes. A CoA reflecting lot-specific appearance, pH, and filtration/manufacturing information is available on request from support@diagnocine.com.
Scientific References

Supporting literature

Curated peer-reviewed literature relevant to RNase-safe buffer design, PVSA-based RNase inhibition, and microfluidic / organ-on-a-chip perfusion.

  1. Bhatia SN, Ingber DE. Microfluidic organs-on-chips. Nat Biotechnol. 2014. doi:10.1038/nbt.2989
  2. Zhang B, Radisic M. Organ-on-a-chip devices advance to market. Lab Chip. 2017. doi:10.1039/C6LC01554A
  3. Blackburn P, Wilson G, Moore S. Ribonuclease inhibitor from human placenta: interaction with derivatives of ribonuclease A. J Biol Chem. 1977.
  4. Femino AM, Fay FS, Fogarty K, Singer RH. Visualization of single RNA transcripts in situ. Science. 1998. doi:10.1126/science.280.5363.585
  5. Bustin SA, et al. The MIQE guidelines: minimum information for publication of quantitative real-time PCR experiments. Clin Chem. 2009. doi:10.1373/clinchem.2008.112797
  6. Dulbecco R, Vogt M. Plaque formation and isolation of pure lines with poliomyelitis viruses. J Exp Med. 1954.
  7. Van Meer BJ, et al. Small molecule absorption by PDMS in the context of drug response bioassays. Biochem Biophys Res Commun. 2017. doi:10.1016/j.bbrc.2016.11.062
  8. Sanjana NE, Fuller SB. A fast flexible ink-jet printing method for patterning dissociated neurons in culture. J Neurosci Methods. 2004.
  9. Huh D, et al. Reconstituting organ-level lung functions on a chip. Science. 2010. doi:10.1126/science.1188302
  10. Srinivasan B, et al. TEER measurement techniques for in vitro barrier model systems. J Lab Autom. 2015. doi:10.1177/2211068214561025

Satisfaction
Quality Rating
Value Rating
Style Rating
X